S&P TRC1600 2200 CFM Commercial Energy Recovery Ventilator

The S&P TRC1600 Commercial Energy Recovery Ventilator provides fresh air exchanges to improve the indoor air quality of commercial spaces in any climate.

This commercial ERV uses two belt drive blower/motor packages and side-by-side AHRI 1060 certified energy recovery cores to deliver an airflow of 500 to 2,000 cubic feet per meter with high efficiency and fan efficacy.

The case is fully insulated with high-density fiberglass and features access doors for quick and easy access to the unit’s blowers, core, and filter. This model uses four MERV 8 filters (20 x 20 x 2 inches) to remove outside and room air impurities.

Power Options

Customers can choose from four different models to best fit a space’s power requirements: 

• 120 V 1P (Single Phase): 60 Hz, 15.2 FLA (per motor), 34.2 minimum circuit amps, 45 amps MOPD.
• 208-230 V 1P (Single Phase): 60 Hz, 8.2-7.6 FLA (per motor), 18.5 minimum circuit amps, 25 amps MOPD.
• 208-230 V 3P (Three Phase): 60 Hz, 4.6-4.8 FLA (per motor), 10.8 minimum circuit amps, 15 amps MOPD.
• 460 V 3P (Three Phase): 60 Hz, 2.4 FLA (per motor), 5.4 minimum circuit amps, 15 amps MOPD.

The TRC1600 also has a non-fused disconnect and a 24 VAC transformer relay package to power and connect optional accessory controllers.

High Efficiency Cores 

The TRC1600 uses two L125-G5 full-sized cores, which crossflow indoor and outdoor airflows using S&P’s “air-to-air” technology. This provides the highest energy recovery possible while keeping airflows separated. 

The resin recovery cores have a unique moisture transfer capability that eliminates moisture and frost build-up in most applications, resulting in higher efficiency and more reliable operation. Additionally, this model does not require a condensate pan or draining solution. 

Easy Installation

The preferred mounting location is sitting on a concrete floor (leveling legs and feet are provided on the unit), or attached to a concrete wall to isolate any blower vibration. Connect new or existing ductwork to this ERV with 24 x 14-inch square receiving flanges.

Certifications

The TRC1600 series is AHRI Certified, cUTLus Listed, and meets the requirements of Buy American (2009) and Build America, Buy America (BABA) as part of IIJA (2022). 

Sylvane’s Expert Take

Use the S&P TRC1600 to provide effective air exchanges for commercial spaces. HVAC professionals will appreciate the TRC1600’s easy installation and maintenance, powerful airflow, and effective energy recovery cores, which improve indoor air quality as required by modern building codes. 

• Twin Motors: Airflow from this ERV is driven by two belt-drive blower motor packages that are totally enclosed and fan-cooled.
• Filters: This ERV’s outdoor and room airflows are filtered by MERV 8 filters, so room air stays clean and stale air impurities are removed. An optional MERV 13 filter can be found here.